Wisconsin Code § 289.05

Solid waste management standards
Open in Lexace · Ask the AI about this section
(1) The
department shall promulgate rules establishing minimum standards for the location, design, construction, sanitation, operation,
monitoring and maintenance of solid waste facilities. Following
a public hearing, the department shall promulgate rules relating
to the operation and maintenance of solid waste facilities as it
deems necessary to ensure compliance and consistency with the
purposes of and standards established under the resource conservation and recovery act, except that the rules relating to open
burning shall be consistent with s. 289.51. The rules promulgated under this subsection shall conform to the rules promulgated under sub. (2).
(2) With the advice and comment of the metallic mining
council, the department shall promulgate rules for the identification and regulation of metallic mining wastes. The rules promulgated to identify metallic mining wastes and to regulate the location, design, construction, operation and maintenance of facilities
for the disposal of metallic mining wastes shall be in accordance
with any or all of the provisions under this chapter and chs. 30
and 283. The rules shall take into consideration the special requirements of metallic mining operations in the location, design,
construction, operation and maintenance of facilities for the disposal of metallic mining wastes as well as any special environmental concerns that will arise as a result of the disposal of
metallic mining wastes. In promulgating the rules, the department shall give consideration to research, studies, data and recommendations of the U.S. environmental protection agency on
the subject of metallic mining wastes arising from the agency’s
efforts to implement the resource conservation and recovery act.
(3) The department shall prescribe by rule minimum standards for closing, long-term care and termination of solid waste
disposal facilities or hazardous waste facilities. The standards
and any additional facility-specific requirements designated by
the department shall be incorporated into the plan of operation
prepared under s. 289.30. The long-term care provisions in an
approved plan of operation may be modified under s. 289.30 (8)
(a) 3. or (b).
(4) The department shall promulgate, by rule, standards for
the reuse of foundry sand and other high-volume industrial waste,
including high-volume industrial waste that qualifies for an exemption from regulation under s. 289.43 (8) . The department
shall design the rules under this subsection to allow and encourage, to the maximum extent possible consistent with the protection of public health and the environment, the beneficial reuse of
high-volume industrial waste, in order to preserve resources, conserve energy and reduce or eliminate the need to dispose of highvolume industrial waste in landfills. In developing rules under
this subsection, the department shall review methods of reusing
high-volume industrial waste that are approved by other states
and incorporate those methods to the extent that the department
determines is advisable. In developing rules under this subsection, the department shall also consider the analysis and methodology used under 40 CFR 503.13 in determining the impacts on
groundwater from various methods of reusing high-volume industrial wastes.

‹ Prev All Wisconsin sections Next ›


Lexace provides legal information, not legal advice, and no attorney–client relationship is created. Statute text is provided for general information and may not reflect the most recent amendments; verify against the official state code.