(a) (1) Each light of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations or installed in a hazardous location within this state shall be labeled as such by etching, sand blasting, firing of ceramic material, or pressure sensitive labels on the safety glazing material. (2) The label shall identify the labeler, whether manufacturer, fabricator, or installer, the thickness and type of safety glazing material, and the fact that the material meets the test requirements of American National Standards Institute Standard Z-97.1 - 1972. (3) The label shall be legible and visible after installation. (b) Safety glazing labeling shall not be used on other than safety glazing materials. Acts 1973, No. 117, § 2; A.S.A. 1947, § 82-733. (a) (1) Each light of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations or installed in a hazardous location within this state shall be labeled as such by etching, sand blasting, firing of ceramic material, or pressure sensitive labels on the safety glazing material. (2) The label shall identify the labeler, whether manufacturer, fabricator, or installer, the thickness and type of safety glazing material, and the fact that the material meets the test requirements of American National Standards Institute Standard Z-97.1 - 1972. (3) The label shall be legible and visible after installation. (b) Safety glazing labeling shall not be used on other than safety glazing materials. Acts 1973, No. 117, § 2; A.S.A. 1947, § 82-733. (a) (1) Each light of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations or installed in a hazardous location within this state shall be labeled as such by etching, sand blasting, firing of ceramic material, or pressure sensitive labels on the safety glazing material. (2) The label shall identify the labeler, whether manufacturer, fabricator, or installer, the thickness and type of safety glazing material, and the fact that the material meets the test requirements of American National Standards Institute Standard Z-97.1 - 1972. (3) The label shall be legible and visible after installation. (b) Safety glazing labeling shall not be used on other than safety glazing materials. Acts 1973, No. 117, § 2; A.S.A. 1947, § 82-733. (a) (1) Each light of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations or installed in a hazardous location within this state shall be labeled as such by etching, sand blasting, firing of ceramic material, or pressure sensitive labels on the safety glazing material. (2) The label shall identify the labeler, whether manufacturer, fabricator, or installer, the thickness and type of safety glazing material, and the fact that the material meets the test requirements of American National Standards Institute Standard Z-97.1 - 1972. (3) The label shall be legible and visible after installation. (1) Each light of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations or installed in a hazardous location within this state shall be labeled as such by etching, sand blasting, firing of ceramic material, or pressure sensitive labels on the safety glazing material. (2) The label shall identify the labeler, whether manufacturer, fabricator, or installer, the thickness and type of safety glazing material, and the fact that the material meets the test requirements of American National Standards Institute Standard Z-97.1 - 1972. (3) The label shall be legible and visible after installation. (b) Safety glazing labeling shall not be used on other than safety glazing materials. Acts 1973, No. 117, § 2; A.S.A. 1947, § 82-733.
‹ Prev All Arkansas sections Next ›
Lexace provides legal information, not legal advice, and no attorney–client relationship is created. Statute text is provided for general information and may not reflect the most recent amendments; verify against the official state code.