(1) In this section, “snowplow” means a vehicle that is operated by a person employed by or on behalf of an authority in charge of the maintenance of the highway to perform highway winter maintenance snow and ice removal, including plowing, salting, and sanding, during either a storm or cleanup following a storm and which is using lamps described in s. 347.26 (7). (2) (a) The operator of any vehicle that is not a snowplow may not follow a snowplow closer than the following distances, if the snowplow is engaged in highway winter maintenance snow and ice removal, as described in sub. (1), and is using lamps described in s. 347.26 (7): 1. Two hundred feet upon any highway having a posted speed limit of more than 35 miles per hour. 2. Seventy-five feet upon any highway having a posted speed limit of 35 miles per hour or less. (b) Paragraph (a) does not apply when overtaking and passing a snowplow, but the fact that the operator of any vehicle follows the snowplow more closely than permitted by par. (a) for one mile or more or follows more closely than permitted by par. (a) when the snowplow is moving at the maximum speed limit is prima facie evidence that the operator of such following vehicle is violating par. (a). (c) Paragraph (a) does not apply to a snowplow that is stopped or standing in the highway. (3) The operator of any vehicle that is not a snowplow and that approaches from the rear any snowplow that is engaged in highway winter maintenance snow and ice removal, as described in sub. (1), and is using lamps described in s. 347.26 (7) and that is stopped at an intersection shall stop not less than 20 feet from the snowplow and remain stopped until the snowplow resumes motion.
‹ Prev All Wisconsin sections Next ›
Lexace provides legal information, not legal advice, and no attorney–client relationship is created. Statute text is provided for general information and may not reflect the most recent amendments; verify against the official state code.