Utah Code § 41-6a-1634

Safety chains on towed vehicles required -- Exceptions
Open in Lexace · Ask the AI about this section
(1) A towed vehicle shall be coupled by means of a safety chain, cable or equivalent device, in
addition to the regular trailer hitch or coupling.
(2) Except as provided under Subsection (3), a safety chain, cable or equivalent device shall be:
(a) securely connected with the chassis of the towing vehicle, the towed vehicle, and the
drawbar;
(b) of sufficient material and strength to prevent the two vehicles from becoming separated; and
(c) attached to:
(i) have no more slack than is necessary for proper turning;
(ii) the trailer drawbar to prevent it from dropping to the ground; and
(iii) assure the towed vehicle follows substantially in the course of the towing vehicle in case the
vehicles become separated.

(3) A violation of Subsection (1) or (2) is an infraction.
(4) The provisions of Subsection (2) do not apply to a:
(a) semitrailer having a connecting device composed of a fifth wheel and king pin assembly;
(b) pole trailer; or
(c) trailer being towed by a bicycle.

‹ Prev All Utah sections Next ›


Lexace provides legal information, not legal advice, and no attorney–client relationship is created. Statute text is provided for general information and may not reflect the most recent amendments; verify against the official state code.