Sec. 16.343. MINIMUM STATE STANDARDS AND MODEL POLITICAL SUBDIVISION RULES. (a) The board shall, after consultation with the attorney general and the commission, prepare and adopt model rules to assure that minimum standards for safe and sanitary water supply and sewer services in residential areas of political subdivisions, including rules of any state agency relating to septic tanks and other waste disposal systems, are met. (b) The model rules must: (1) assure that adequate drinking water is available to the residential areas in accordance with Chapter 341 , Health and Safety Code, and the Rules and Regulations for Public Water Systems and the Drinking Water Standards Governing Water Quality and Reporting Requirements for Public Water Supply Systems adopted by the commission and other law and rules applicable to drinking water; and (2) provide criteria applicable to tracts that were divided into two or more parts to lay out a subdivision and were not platted or recorded before September 1, 2005. (c) The model rules must: (1) assure that adequate sewer facilities are available to the residential areas through either septic tanks or an organized sewage disposal system that is a publicly or privately owned system for the collection, treatment, and disposal of sewage operated in accordance with the terms and conditions of a valid waste discharge permit issued by the commission or private sewage facilities in accordance with Chapter 366 , Health and Safety Code, and the Construction Standards for On-Site Sewerage Facilities adopted by the commission and other law and rules applicable to sewage facilities; and (2) provide criteria applicable to tracts that were divided into two or more parts to lay out a subdivision and were not platted or recorded before September 1, 2005. (d) The model rules must prohibit the establishment of residential developments with lots of five acres or less in the political subdivision without adequate water supply and sewer services. Also, the model rules must prohibit more than one single-family, detached dwelling to be located on each lot. (e) The model rules must provide criteria governing the distance that structures must be set back from roads or property lines to ensure proper operation of water supply and sewer services and to reduce the risk of fire hazards. (f) The model rules may impose a platting or replatting requirement pursuant to Subsection (b)(2), (c)(2), or (d). Except as may be required by an agreement developed under Chapter 242 , Local Government Code, and subject to Subsection (f-1), a municipality that has adopted the model rules may impose the applicable platting requirements of Chapter 212 , Local Government Code, and a county that has adopted the model rules may impose the applicable platting requirements of Chapter 232 , Local Government Code, to real property that is required to be platted or replatted by the model rules under this section. (f-1) The model rules do not supersede an exception to a platting requirement prescribed by Subchapter G , Chapter 232 , Local Government Code. (g) Before an application for funds under Section 15.407 or Subchapter P , Chapter 15 , or Subchapter K, Chapter 17 , may be considered by the board, if the applicant is located: (1) in a municipality, the municipality must adopt and enforce the model rules in accordance with this section; (2) in the extraterritorial jurisdiction of a municipality, the applicant must demonstrate that the model rules have been adopted and are enforced in the extraterritorial jurisdiction by the municipality or the county; or (3) outside the extraterritorial jurisdiction of a municipality, the county must adopt and enforce the model rules in accordance with this section.
‹ Prev All Texas sections Next ›
Lexace provides legal information, not legal advice, and no attorney–client relationship is created. Statute text is provided for general information and may not reflect the most recent amendments; verify against the official state code.