61-8-211 . Lane use control signals. When lane use control signals are placed over individual lanes, the signals indicate and apply to operators of vehicles as follows: (1) An operator of a vehicle may drive in the lane over which a steady downward green arrow signal is located. (2) An operator of a vehicle must be prepared to vacate, in a safe manner, the lane over which a steady yellow X signal is located because a lane control change is being made to a steady red X signal. (3) An operator of a vehicle may not use the lane over which the steady red X signal is located. (4) An operator of a vehicle may use a lane over which a steady white two-way left-turn arrow signal is located for a left turn but not for through travel. The operator must be aware that common use of the lane by oncoming vehicular traffic is also permitted. (5) An operator of a vehicle may use a lane over which a steady white one-way left-turn arrow signal is located for a left turn but not for through travel.
‹ Prev All Montana sections Next ›
Lexace provides legal information, not legal advice, and no attorney–client relationship is created. Statute text is provided for general information and may not reflect the most recent amendments; verify against the official state code.